2
C H A P T E R
Installing and Configuring a Sun StorEdge 6130
Array
This chapter contains the procedures about how to install and configure a Sun StorEdge
These procedures are specific to a Sun
This chapter contains the following main topics:
I
"Installing Storage Arrays" on page 13
I
"Configuring Storage Arrays" on page 17
For detailed information about storage array architecture, features, configuration utilities, and
installation, see the Sun StorEdge 6130 Array Getting Started Guide.
For a URL to this storage documentation, see
Installing Storage Arrays
This section contains the procedures listed in
TABLE 2–1
Task
Install a storage array in a new cluster, before the OS
and Sun Cluster software are installed.
Add a storage array to an existing cluster.
Storage Array Cabling Configurations
You can install your storage array in several different configurations:
two examples.
2
Task Map: Installing Storage Arrays
TM
Cluster environment.
"Related Documentation" on page
Table
2–1.
Information
"How to Install Storage Arrays in a New Cluster"
on page 14
"How to Add Storage Arrays to an Existing Cluster"
on page 16
TM
6130 array.
6.
Figure 2–1
and
Figure 2–2
are
13