Removing And Installing Starter Locking And Backup Light Switch - Porsche 928 Workshop Manual

928
Automatic Transmission/Controls, Case
37
REMOVING AND INSTALLING STARTER LOCKING AND BACKUP
LIGHT SWITCH
Removing
1. Disconnect selector lever cable.
- in
I q&.'.
2. Remove bolt for range selector lever and
pull off lever.
3. Unlock plug by turning white plastic ring
(arrow) upwards in direction of arrow.
IWJ
--- --
I
4. Pry off plug carefully with two screw
drivers applied on cable outlet and bar.
'/ -
-,fy!y;@-@+-q i3
.-w-y _.. YQ;)(: .. 2
? .-"
-a
? --'
-',&
+ of j,%gg$ -'
.:'y $g ,(
5. Remove switch mounting screws and take
off switch.
Installing
1. Install switch with both mounting screws,
but do not tighten.
Printed in Germany -
VI I I, 1984
Removing and Installing Starter Locking
37.107
and Backup Light Switch