Connecting A Monitoring Cable To A Netcol5000-A; Connecting A Monitoring Cable To A Netcol8000-A; Connecting A Monitoring Cable To A Hipulse-Nxl Ups - Huawei IDS2000 Dual-Row Aisle Containment Installation Manual

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Step 2 Connect the other end of the network cable to the RS485 port on the CCU collector or ECC
collector.
----End

10.12.32 Connecting a Monitoring Cable to a NetCol5000-A

Prerequisites



Procedure
Step 1 Connecting monitoring cable to NetCol5000-A is the same as NetCol5000-C030, for details,
see
----End

10.12.33 Connecting a Monitoring Cable to a NetCol8000-A

Prerequisites



Procedure
Step 1 Connecting monitoring cable to NetCol8000-A is the same as NetCol5000-C030, for details,
see
----End

10.12.34 Connecting a Monitoring Cable to a HIPULSE-NXL UPS

Prerequisites
A network cable used for monitoring has been prepared.
Procedure
Step 1 Connect one end of the network cable to the COM1 or COM2 port on the HIPULSE-NXL
UPS, as shown in
Issue 02 (2015-06-30)
A network cable used for monitoring is prepared.
You are familiar with the functions of all ports on the CCU collector by referring to
10.12.2 Port Description for the CCU
You are familiar with the functions of all ports on the ECC collector by referring to
10.12.3 Port Description for the ECC
10.12.31 Connecting a Monitoring Cable to a
A network cable used for monitoring is prepared.
You are familiar with the functions of all ports on the CCU collector by referring to
10.12.2 Port Description for the CCU
You are familiar with the functions of all ports on the ECC collector by referring to
10.12.3 Port Description for the ECC
10.12.31 Connecting a Monitoring Cable to a
Figure 10-70.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Collector.
Collector.
NetCol5000-C030.
Collector.
Collector.
NetCol5000-C030.
10 Cable Layout
239