Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 10-11 Cable routes for the aisle lighting system
(A) Connecting to the lighting control box in the network cabling cabinet
After connecting the aisle lights in series, connect one end of the outermost light to its
delivered aisle lighting cable. Cut off the plug of the LED light before routing the cable out of
the aisle. Then strip the cable and clamp it with the cable distributed to the site using a
multi-wire terminal. Connect the cable to the lighting control box in the network cabling
cabinet, as shown in
off.
Issue 02 (2015-06-30)
Figure 10-12
and
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10-13. In this example, a male connector is cut
10 Cable Layout
160
Advertisement
Table of Contents
