Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 3-40 Assembling a door frame
Step 3 Secure each door post to the skylight sealing kit using M6x16 screws.
Step 4 Secure each door post to the auxiliary bar using two M6x16 screws.
Step 5 After assembly, check that door posts are aligned with the skylight sealing kit.
----End
Installing a Door Frame
Procedure
Step 1 Attach a door frame to the cabinets.
Step 2 Partially secure a door post to a skylight connective plate using two M6x16 screws and nuts.
A total of four M4 screws and nuts are used to secure the two posts. If a door post is secured
to a 2 m high cabinet, tighten screws into holes shown in 2 in
secured to a 2.2 m high cabinet, tighten screws into holes shown in 1 in
Issue 02 (2015-06-30)
In
Step
2, three screws are required for a 2200 mm high cabinet.
It is recommended that the assembly be completed by multiple persons in teamwork. To facilitate
assembly, lay the door posts, upper frame mounting kit, and auxiliary bar on the floor.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
Figure
3-41. If a door post is
Figure
3-41.
62
Advertisement
Table of Contents
