IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
----End
10.12.41 Connecting a Monitoring Cable to a UPS8000-D
Prerequisites
A network cable used for monitoring has been prepared.
Procedure
Step 1 Connect one end of a network cable to the communications card network port on the
UPS8000-D, as shown in
Figure 10-72 SNMP card
(1) SNMP card (optional)
Step 2 Connect the other end of the network cable to the Ethernet port on the switch.
----End
Issue 02 (2015-06-30)
Figure
10-72.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) SNMP card (optional)
10 Cable Layout
243