Connecting A Monitoring Cable To A Pdu8000-0250Acv4-Sca005 - Huawei IDS2000 Dual-Row Aisle Containment Installation Manual

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 10-74 Wiring terminals on the TU520A ATS
Step 2 Connect the cord end terminal of the RS485 monitoring cable to the RS485 port in the
PDU8000.
the colors of core wires in the cord end terminal.
Table 10-77 Mapping between the wiring terminals in the RS485 port and the colors of core wires
in the cord end terminal
Type of the Collector
Connected
CCU collector
ECC collector
Step 3 Connect the RJ45 connector of the RS485 monitoring cable to the RS485 port on the CCU
collector or ECC collector.
----End
10.12.48 Connecting a Monitoring Cable to a
PDU8000-0250ACV4-SCA005
Prerequisites
A network cable used for monitoring has been prepared.
Issue 02 (2015-06-30)
Table 10-77 lists the mapping between the wiring terminals in the RS485 port and
Wiring Terminal in the
RS485 Port
16
17
16
17
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Cable Layout
Color of Core Wire in the
Cord End Terminal
Orange and white, blue
Orange, blue and white
Orange and white
Orange
249