Huawei IDS2000 Dual-Row Aisle Containment Installation Manual page 58

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)

The screw positions vary depending on scenarios. Each mounting bracket must be secured
by two tapping screws.

When a mounting ear interferes with a fastening screw on top of a cabinet, remove the
screw on top of the cabinet, and use this screw to secure the cabinet top cover and the
mounting ear together on the side supporting beam.

Do not tighten the mounting ears first. The mounting ears will be slightly moved
subsequently. Tighten the mounting ears with a skylight sealing kit of a sliding door upper
frame.
Step 2 Secure an upper guide rail to the left and right mounting ears of the sliding door using M6
screws, as shown in
Figure 3-27 Installing an upper guide rail
Step 3 Install a sliding door top frame.
Issue 02 (2015-06-30)
Figure 3-26 Installing a sliding door mounting ear for a 2200 mm high cabinet
Figure 3-27.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
50