Huawei IDS2000 Dual-Row Aisle Containment Installation Manual page 78

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Step 2 Secure one end of a door closer arm to the door closer on the top of a door panel using a hex
key, and the other end to the guide rail using bolts.

Properly hold the door closer arm when installing or removing it to prevent it from
bouncing due to the pretightening force from the closer.

Properly store fittings that are not used, such as the card reader mounting plate.
Figure 3-51 Installing a door closer arm
Step 3 Open the door to the maximum and snap the door closer lever into the guide rail.
Figure 3-52 Guide rail
(1) Lock
(2) Tuning screw used to tune the maximum door openness
(3) Spring screw used to fix the door to its current openness

Issue 02 (2015-06-30)
If the lever does not fit firmly into the guide rail, adjust the captive screws using the solid wrench
delivered with the closer to fasten the lever.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
70