Huawei IDS2000 Dual-Row Aisle Containment Installation Manual page 50

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)

After the skylight is accurately mounted, fully tighten the screws to secure the skylight
connective plate to the cabinet.

Tilt the side with the barrier strip upwards, tilt the side without the barrier strip downwards,
and lift the skylight to the top of the aisle to install it. If the skylight is installed in the
opposite tilting direction, the skylight cannot be closed. If this happens, remove the
skylight and install it again correctly.

Install mechanical parts of electromagnets on the same side with the magnetic lock
fasteners, as shown in

The barrier strip for the rotating skylight can make it rotate in only one direction. Install all
the barrier strips for the rotating skylights on the same side, as shown in
Issue 02 (2015-06-30)
Figure
Figure 3-16 Installing skylights
Figure 3-17 Barrier strip direction
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
3-16.
Figure 3-17.
42