Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 5-2 Installing a fixing plate
There is no need to remove the two screws if they were not installed.
Step 2 Secure the delivered base to the fixing plate using M8 x 20 bolt assemblies, as shown in
Figure
Figure 5-3 Securing a delivered base
Keep the rectangle side with the ground sign facing outwards when securing the base to the fixing plate.
Step 3 Place the cable ladder on the bases and secure the cable ladder to the bases using conversion
brackets and M8 x 20 bolt assemblies, as shown in
Issue 02 (2015-06-30)
5-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing Cable Trays
Figure
5-4.
88
Advertisement
Table of Contents
