Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Symptom
gaps.
Figure 3-35 Position of hanging wheels
Step 8 Check the suitability of the gap between the two middle positioning kits. If problems occur
after closing the door, adjust the gap by following
Table 3-7 Methods for adjusting the gap of the middle positioning kits
Symptom
The gap between the two positioning kits is
wide, and the door panels cannot be closed.
The gap between the two positioning kits is
narrow. The door panels as a whole still
have space to move to the left or right after
the door is closed.
Issue 02 (2015-06-30)
Cause
top of the left door
panel.
The left is higher
than the right at the
top of the right door
panel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
Adjusting
Method
left door panel
counterclockwise, or
rotate the external
hanging wheel of the
left door panel
clockwise.
Rotate the internal
hanging wheel of the
right door panel
counterclockwise, or
rotate the external
hanging wheel of the
right door panel
clockwise.
Table
3-7.
Adjusting Method
Loosen one of the positioning kits, and
narrow the gap between the two positioning
kits until the door can be closed.
Loosen one of the positioning kits, and
widen the gap between the two positioning
kits until the door can be closed.
Basic
Requirements
56
Advertisement
Table of Contents
