Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Context
Procedure
Step 1 Place a skylight ceiling controller in the appropriate position on the controlled skylight ceiling,
and secure it by using screws.
Figure 9-29 Installing the skylight ceiling controller
----End
9.1.13 Installing a WCON-14Z Skylight Controller
Prerequisites
A skylight controller and tools for installing it have been prepared.
Context
Install the skylight controller in the network cabling cabinet.
Procedure
Step 1 Install the floating nuts by referring to
Step 2 Place a skylight controller in front of the network cabling cabinet.
Step 3 Remove the ground nuts from the side of the skylight controller. Rotate the mounting ears of
the skylight controller 180 degrees before place the skylight controller into the network
cabling cabinet, as shown in
Step 4 Place the skylight controller in the network cabling cabinet. Secure the skylight controller in
the network cabling cabinet by clockwise tightening the M6 screws on the left and right
mounting ears, as shown by 2 in
Issue 02 (2015-06-30)
Place the skylight ceiling controller on the outer surface of the controlled skylight
ceiling.
Obtain the screws from the fitting bag for the skylight ceiling.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 1
in
9.1.1 Installing the
Figure
9-30.
Figure
9-30.
9 Installing Auxiliary Devices
RH2288.
147
Advertisement
Table of Contents
