Installing A Smoke Detector - Huawei IDS2000 Dual-Row Aisle Containment Installation Manual

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 9-17 Installing a dome cover
----End

9.1.8 Installing a Smoke Detector

Prerequisites


Context



Procedure
Step 1 Secure the smoke detector base to the appropriate hole in the control skylight using M3x10
screws, as shown in
Issue 02 (2015-06-30)
The object to support a smoke detector has been installed.
A smoke detector and tools for installing it have been prepared.
This section describes how to install a smoke detector on the control skylight. To install
smoke detectors on different objects, perform the similar steps.
The screws for installing a smoke detector are located in the fitting bag of the supporting
object. For example, the screws for installing the smoke detector on the control skylight
are located in the fitting bag of the control skylight.
Prior to installing the smoke detector, properly connect the detector cables to avoid
unnecessary removal.
Figure 9-18.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Auxiliary Devices
139