Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Context
Procedure
Step 1 Secure the base of the ambient temperature and humidity sensor to the control skylight ceiling
by using M3x10 bolts, as shown in
Figure 9-20 Installing the base
Step 2 Press down the strip on the ambient temperature and humidity sensor. Align the strip with the
hole in the sensor base, and then secure the ambient temperature and humidity sensor to the
base, as shown in
Issue 02 (2015-06-30)
This section describes how to install an ambient temperature and humidity sensor on the
control skylight. Perform the same steps to install sensors on different objects..
The screws used for mounting the ambient temperature and humidity sensor are available
in the fitting bag of its carrier. For example, if the ambient temperature and humidity
sensor is to be mounted on the control skylight, obtain the screws from the fitting bag of
the control skylight.
Connect cables to an ambient temperature and humidity sensor before installation.
Figure
9-21.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
9-20.
9 Installing Auxiliary Devices
141
Advertisement
Table of Contents
