Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
(1) Double door electromagnetic lock
(3) Four-core cable A
(5) Four-core cable B
Secure wire harness A near the magnetic locks using a cable tie.
2.
3.
4.
After connecting cables to wire harness B, place wire harness B near the emergency door release button
without securing it.
5.
Issue 02 (2015-06-30)
Figure 10-6 Cable connections
Strip four-core cable A delivered with the cabinet and connect it to the other end of wire
harness A. Then route the cables to the emergency door release button according to
Figure
10-7.
Figure 10-6
Directly connect the yellow cable to binding post 2 at the rear of the emergency door
release button and the other three to wire harness B delivered with the cabinet.
10-6
shows the cable connections.
Strip four-core cable B delivered with the cabinet and connect the yellow cable to
binding post 1 at the rear of the emergency door release button and the other three to the
other end of wire harness B.
Route four-core cable B out of the aisle and finally to the access control controller in the
cabling cabinet according to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Wire harness A
(4) Wire harness B
(6) Rear of the emergency door release button
shows the cable connections.
Figure 10-6
shows the cable connections.
Figure
10-7.
10 Cable Layout
Figure
156
Advertisement
Table of Contents
