Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 3-43 Securing a door panel to each post using hinges
Step 2 Secure the door panels to the posts using M4 countersunk screws.
----End
Adjusting Gaps between Door Panels
Context
After the door panels are installed and closed, gaps between panels may be uneven and look
ungraceful, as shown in
Table 3-9 Types of faults for door panel installation
Type of Fault
Tilted door panel
Varying gap between
door panel and door
header
Door mismatch
Issue 02 (2015-06-30)
It is recommended that hinges be installed from the top down.
Table
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
3-9. If the gaps are even, skip this procedure.
Root Cause
The left and right cabinets
onto which the door header is
hung are not on the same
level, or the door header and
posts are tilted because the
floor is uneven.
One post has tilted, or the door
does not match with the door
header due to a manufacturing
tolerance.
The left and right cabinets
onto which the door header is
hung are not on the same
Measure
For details about the adjusting
method, see
Step
1.
For details about the adjusting
method, see
Step
2.
For details about the adjusting
method, see
Step
3.
65
Advertisement
Table of Contents
