Huawei IDS2000 Dual-Row Aisle Containment Installation Manual page 153

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 9-25 Connecting water detection cable to the conversion cable
(1) Conversion cable end B, connecting to
the water detection cable
The water detection cable and conversion cable are interconnected through the male and female
connectors.
Step 2 Connect the other end of the conversion cable to the water detector, as shown in
Figure 9-26 Water detector
Step 3 Plan the installation position for the fastener of the water detection cable. Ensure that the
water detection cable placed on the fastener is in good contact with the floor.
Step 4 Tear off the protection paper on the rear of the fastener, then securely attach the fastener to
the floor.


Step 5 Drill holes into the floor with the same dimensions as the expansion bolts for the fastener. Use
the expansion bolts and screws to secure the fastener to the floor, as shown in
Issue 02 (2015-06-30)
If the fastener fails to be securely attached to the floor, perform
If the fastener can be securely attached to the floor, perform
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Auxiliary Devices
(2) Water detection cable end A, connecting
to the conversion cable
Step
Step 6.
Figure 9-26.
5.
Figure 9-27.
145