Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 6-3 Inserting clasps into the square holes
Step 2 Rotate the bracket by 90 degrees to stand it on the cabinet roof, as shown in
Figure 6-4 Rotating a bracket by 90 degrees
Step 3 Refer to the preceding step to install the other bracket on the holes 225 mm (a distance of
eight square holes) away from the holes of the first bracket, and secure a black M5 x 10
tapping screw to the interior of two panels using a long-handled Phillips screwdriver, as
shown in
Issue 02 (2015-06-30)
Figure
6-5.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Cable Troughs
Figure
6-4.
95
Advertisement
Table of Contents
