Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Procedure
Step 1 Take the PVC pipe out of the fitting bag of control skylights.
Step 2 Check the aisle width using the PVC pipe, as shown in
Figure 3-6 Checking the aisle width (unit: mm)
Step 3 Install skylight connective plates.
1.
Issue 02 (2015-06-30)
If the actual width of the aisle checked is not equal to 1200 mm, adjust the locations of the cabinets
in the aisle to ensure that the width is 1200 mm.
The distance checked by the PVC pipe is the distance between the two front doors of the cabinets in
the aisle.
Do not throw away the PVC pipe after use. You need to use it when installing skylights.
Skylight connective plates have three specifications: 300 mm wide, 600 mm wide, and 800 mm wide.
Choose the skylight connective plates with the suitable dimensions based on the dimensions of cabinets.
Secure the skylight connective plate to the cabinet.
−
Secure the skylight connective plate to the common cabinet: secure skylight
connective plates to the top of cabinets using a socket wrench and M12 bolts, as
shown in
Figure
3-7.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
Figure
3-6.
35
Advertisement
Table of Contents
