Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Position
Procedure
Step 1 Connect cables to the ports on the skylight controller, as shown in
Figure 10-52 Ports on the WCON-14Z skylight controller
Table 10-53
Table 10-53 Cable connections to the ports of the skylight controller
Port
12 V+
G-
C
Issue 02 (2015-06-30)
The red button for the skylight controller is a spare part and does not require a cable connection by
default. If remote open is required (in a customized scenario), connect the button to the MANUAL port
on the skylight controller.
shows how to connect cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Function
Connection Method
Connects to the positive pole (red) of the
smoke sensor power source.
Connects to the smoke sensor GND (black).
Connects to the common end (green) of the
10 Cable Layout
Scenario Example
button or start remote open,
the 1 (+ –) to 14 (+ –) ports
do not supply power to the
magnetic lock. Then the
magnetic force of the
magnetic lock disappears
and the skylight opens.
Figure
10-52.
213
Advertisement
Table of Contents
