Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
3.
4.
5.
6.
Issue 02 (2015-06-30)
Figure 2-15 Adjusting the height of the leveling base anchors (unit: mm)
Install two adaptive bars into the side without side panels so that the total width of the
adaptive frame is 200 mm, and use M5 self-tapping screws to secure the adaptive bars.
Figure 2-16 Installing adaptive bars
Lift the adaptive frame, and adjust its position so that its side without side panels is
closely attached to the 1200 mm deep cabinet.
Adjust the leveling base anchors so that the left cabinets are at the same height.
Use connecting plates to combine the adaptive frame with the cabinet. Use an 86 mm
long connecting plate for the side with adaptive bars, and a 78 mm long connecting plate
for the side without adaptive bars.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installing Cabinets
17
Advertisement
Table of Contents
