Connecting A Monitoring Cable To A Ups2000-G; Connecting A Monitoring Cable To A Ups5000-E - Huawei IDS2000 Dual-Row Aisle Containment Installation Manual

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Procedure
Step 1 Connect one end of the network cable to the Ethernet port on the TCP/IP card in the Riello
UPS.
Step 2 Connect the other end of the network cable to the Ethernet port on the switch.
----End

10.12.39 Connecting a Monitoring Cable to a UPS2000-G

Prerequisites
A network cable used for monitoring has been prepared.
Procedure
Step 1 Connect one end of the network cable to the communications card Ethernet port on the
UPS2000-G, as shown by 1 in
Figure 10-71 UPS2000-G Ethernet port
(1) Ethernet port
Step 2 Connect the other end of the network cable to the Ethernet port on the switch.
----End

10.12.40 Connecting a Monitoring Cable to a UPS5000-E

Prerequisites
A network cable used for monitoring is prepared.
Procedure
Step 1 Connect one end of the network cable to the Ethernet port on monitor in the UPS5000-E.
Step 2 Connect the other end of the network cable to the Ethernet port on the switch.
Issue 02 (2015-06-30)
Figure 10-71.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Cable Layout
242