Huawei IDS2000 Dual-Row Aisle Containment Installation Manual page 62

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)

When sliding the door into the lower stopper, lift the door upwards to push the extruded
slots at the bottom of the door into the lower stopper.

Brushes are located on the inner side of a sliding door. They are used to close the gaps
between a sliding door and a cabinet.
Step 6 Close the two door panels. When the gap between door panels is in the middle of the aisle,
secure the two positioning kits in the middle of the sliding door using a screwdriver, as shown
in Figure



Issue 02 (2015-06-30)
Figure 3-33 Installing a sliding door
3-34.
Align one of the door panels to the middle position of the contained aisle, push the positioning kit to
the cabinet side by pushing the sliding door, and then secure the positioning kit using a Phillips
screwdriver. Ensure that the lower stopper is still in the extruded slot of the door.
The dimensions shown in
Huawei recommends installing two door panels symmetrically beside the axis of the doorhead,
which contributes to installation elegance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
Figure 3-34 is for reference.
54