Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Type of Fault
Procedure
Step 1
Figure 3-44
Figure 3-44 Tilted door panel
Step 2
Figure 3-45
corner tilts downward). You can push the lower part of the post or add washers between the
door header and post for adjustment, as shown in
outward if a corner of a door panel tilts upward.
Issue 02 (2015-06-30)
shows a tilted door. You can solve the problem in the following ways:
If the door tilts by a large degree, adjust the anchor bolt of the cabinet. If a post is lifted
off the floor due to the adjustment, add washers under the post.
If the door slightly tilts, add washers under the corresponding post to correct the tilt.
Make adjustment and ensure that the bottom of the posts attaches closely to the floor.
shows a door with a varying gap between the door panel and door header (a
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation Scenarios in Dual Row Aisle Containment
Root Cause
level.
Figure
Measure
3-46. Pull the upper end of the posts
66
Advertisement
Table of Contents
