Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
1.
2.
3.
If any of the preceding conditions occur, the magnet lock cannot work properly, and you need
to adjust the magnet as follows:
1.
2.
3.
4.
Figure 7-11 Adjusting the gap between a magnetic lock and a magnet
Figure 7-12 Spacer
Issue 02 (2015-06-30)
Check whether the magnet provides magnetic force by attaching magnetizable iron parts
to it.
Check whether the magnetic lock faces the magnet.
Check whether a gap exists between the magnetic lock and the magnet.
Check the circuit and rectify any faults.
Adjust the magnet base and door panels to ensure that the magnet faces the magnetic
lock. A little position deviation is allowed.
If a gap exists between the magnetic lock and the magnet, rectify the fault by following
the instructions in
Figure
If the magnet is not level, use a spacer shown in
levelness.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7-11.
Figure 7-12
7 Installing the Access Control System
to adjust the magnet
108
Advertisement
Table of Contents
