Removing An Fbu; Preliminary Steps; Removing The Fbu With The Holder - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.2

Removing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw flash backup units into the trash can. Batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
9.5.2.1

Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
9.5.2.2

Removing the FBU with the holder

Figure 137: Removing the FBU with the holder
Ê Lift up the green locking handle on the holder (see circle) while sliding the
holder in direction of the arrow as far as it will go.
I
After that, the shoulder screw caps on the chassis floor will rest in the
wide ends of the keyhole slots on the holder.
218 Upgrade and Maintenance Manual
Hardware: 15 minutes
RX1330 M3