Ac Coupled: Accy Unspec'd <10 Mhz - Keysight X-Series Manual

Instrument Messages
Condition Messages
This register is summarized as bit 3 of the
register, as described in the section
page
Err# Status Message
Register
Bit
301 0
Meas Uncal
303 1
Signal ID on
305 2
No Long Code Phase
307 3
AC coupled: Accy unspec'd
<10 MHz
309 4
User cal
Instrument Messages
92.
STATus:QUEStionable:INTegrity
"101 to 199, Measurement Integrity" on
Error or Verbose/Correction Information
Warning
W A Meas Uncal warning is being displayed;
generally this means the sweep time must
be reduced or the RBW increased
W In external mixing, the Sig ID function is on,
which will impact the trace results
W The long code phase that identifies an
access channel cannot be found (WCDMA)
W AC input coupling will function at lower
frequencies, but the performance is not
specified below 10 MHz.
W
103