Block Data Error - Keysight X-Series Manual

Instrument Messages
Event Messages
Err# Message
-130
Suffix error
-131
Invalid suffix
-134
Suffix too long
-138
Suffix not allowed
-140
Character data error
-141
Invalid character
data
-144
Character data too
long
-148
Character data not
allowed
-150
String data error
-151
Invalid string data
-158
String data not
allowed
-160

Block data error

-161
Invalid block data
-168
Block data not
allowed
-170
Expression error
-171
Invalid expression
-178
Expression data not
allowed
-180
Macro error
-181
Invalid outside macro
definition
Instrument Messages
Verbose/Correction Information
A problem was found in a suffix (units). The exact problem cannot be
specifically identified.
There is a syntax problem with the suffix. You need to use the suffix (units) that
are allowed by this command.
The suffix contained more than twelve characters.
A suffix was found after a numeric element that does not allow suffixes (units).
A problem was found with a character data element. The exact problem cannot
be specifically identified.
Either the character data element contains an invalid character or the element
itself is not valid for this command.
The character data element contains more than twelve characters.
A character data element that you sent is valid, but it is not allowed in this point
in the parsing.
A problem was found with a string data element. The exact problem cannot be
specifically identified.
A string type of data element was expected, but it is invalid for some reason.
For example, an END message was received before the terminal quote
character.
A string data element that you sent is valid, but it is not allowed at this point in
the parsing.
A problem was found with a block data element. The exact problem cannot be
specifically identified.
A block data element was expected, but it was invalid. For example, an END
message was received before the end length was satisfied.
A legal block data element was found, but it is not allowed at this point in the
parsing.
A problem was found with an expression data element. The exact problem
cannot be specifically identified.
An expression data element is not valid. For example, there may be unmatched
parentheses or an illegal character.
A legal expression data was found, but it is not allowed at this point in the
parsing.
A problem was found with a macro element. The exact problem cannot be
specifically identified.
Indicates that a macro parameter placeholder was encountered outside of a
macro definition.
85