I/O Error - Keysight X-Series Manual

Instrument Messages
Condition Messages
Err# Bit in Message
status
register
147 7
Insufficient Data; Loss table
empty
147 7
Insufficient Data; trigger
received before current segment
is complete
149 8
Meas Error
149 8
Meas Error; Power meter error
151 9
Memory Error
151 9
Memory Error;Shorten capture
interval
153 10

I/O Error

153 10
I/O Error; Ext Source needs IP
Addr
155 11
Trig Error
157 12
Invalid Data
159 13
Settings Alert
Instrument Messages
Error or More Information
Warning
E A measurement is attempted or a
SCPI query of a before or after loss
table is made and there are no entries
in the relevant loss table
E In PAvT measurement with Meas Type
of Triggered, a new trigger was
received before processing of the
current segment is complete. Shorten
Meas Offset + Meas Interval or
prevent trigger from occurring.
The power meter has returned an
error. Details are in the error history.
This must be corrected so that the
measurement can complete
successfully.
E
E A shortage of free memory related to
longer capture intervals has occurred.
The measurement is aborted and all
results return invalid values
E
E No IP address entered for external
source and external LO control is ON.
E
Status bit This is the "invalid data indicator",
only same as the "*" in the upper right
corner of the screen. It means that the
on-screen annotation does not match
the on-screen data, usually because a
measurement is pending after a
settings change. There is no message
in the status line and nothing in the
history queue, but there IS an
on-screen indication and a status bit.
W
95