To 699, Error Summaries - Keysight X-Series Manual

Instrument Messages
Condition Messages
Err# Bit in Message
status
register
521 10
Ref missing or out of
range;External
521 10
Ref missing or out of
range;Pulse
523 11 unused
525 12 unused
527 13 unused
529 14 unused

601 to 699, Error Summaries

This series of errors corresponds to the bits in the
register (see
STATus:QUEStionable?
query.
The second column in the table shows the corresponding bit in the status
register. These bits do not have any corresponding error messages, although
error numbers have been reserved for them as seen in the Err# column; they
are status bits only.
The bits in the
at a lower level. Note that these summary bits summarize the state and history
of the event registers at the lower level. This is true even for bits in the
STATus:QUEStionable
— The summary bits read by the
— The summary bits read by the
Instrument Messages
"X-Series Status Register System" on page
event query or a
STATus:QUEStionable
condition register. This means that:
true if any event bits are set in any of the :QUEStionable sub-registers
:POWer, :TEMPerature, FREQuency, CALibration or :INTegrity.
if any event bit has undergone a false-to-true transition with the
PTRansition filter set, or a true-to-false transition with the NTRansition filter
set, in any of the :QUEStionable sub-registers :POWer, :TEMPerature,
FREQuency, CALibration or :INTegrity.
Error or More Information
Warning
E The external frequency reference
signal is missing or is not within the
proper amplitude range.
In the PSA, this error was reported as
error 622
E The pulse reference signal is missing
or is not within the proper amplitude
range.
STATus:QUEStionable
STATus:QUEStionable:CONDition?
register are "summary bits" for registers
STATus:QUEStionable:CONDition?
STATus:QUEStionable?
116), read with a
query are
event query are true
109