Input Overload - Keysight X-Series Manual

Instrument Messages
Condition Messages
Note that these summary bits summarize the state and history of the event
registers at the lower level. This is true even for bits in the
STATus:QUEStionable:INTegrity
— The summary bits read by the
— The summary bits read by the
Thus, the summary bits cannot be used to determine the current state of a
lower level condition bit; only the state and history of the lower level event bits.
This register is itself summarized as bit 9 of the STATus:QUEStionable register,
as described in the section
Err# Bit in Message
status
register
133 0
Signal Summary
135 1
No Result
135 1
No Result;Turn on MCE
135 1
No Result; Meas invalid with I/Q
inputs
135 1
No Result;Meas/Radio Std
incompatibility
137 2 unused
139 3
Uncalibrated Summary
141 4

Input Overload

Instrument Messages
STATus:QUEStionable:INTegrity:CONDition?
bits are set in any of the :INTegrity sub-registers :SIGNal or :UNCalibrated.
query are true if any event bit has undergone a false-to-true transition with
the PTRansition filter set, or a true-to-false transition with the NTRansition
filter set, in any of the :INTegrity sub-registers :SIGNal or :UNCalibrated
a
condition register. This means that:
STATus:QUEStionable:INTegrity?
"601 to 699, Error Summaries" on page
Error or More Information
Warning
Status bit This bit is the summary bit for the
only STATus:QUEStionable:INTegrity:SIGN
al sub-register.
E
E To calculate Timing and Phase results
in the Code Domain Power view of
Mod Accuracy, the "Multi Channel
Estimator" must be set to ON.
Otherwise these results are invalid.
E The current measurement does not
support I/Q input; switch to the RF or
another input or select a different
measurement
E The current measurement is
incompatible with the current Radio
Standard; change Radio Standard to
use this measurement
Status bit This bit is the summary bit for the
only STATus:QUEStionable:INTegrity:UNCa
librated sub-register.
E*
query are true if any event
event
109.
93