Function Diagrams - Siemens Sinamics G120 Series Parameter Manual

Parameters
Introduction to Parameters
Bit field
For parameters with bit fields, the following information is provided about each bit:
• Bit number and signal name
• Meaning with signal states 0 and 1
• Function diagram (optional). The signal is shown on this function diagram.
Dependency
Conditions which need to be fulfilled in connection with this parameter. Also
includes special effects which can occur between this parameter and others.
Seven-segment display
The seven-segment display of the OP is structured as follows:
Segment Bit
Segment Bit
Fig. 1-3
1-12
15 14 13 12
7 6 5 4
Seven-segment display
11 10 9 8
3 2 1 0
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Visio-7-Segment Display.pdf