Siemens Sinamics G120 Series Parameter Manual page 110

Parameters
List of Parameters
r0982[0...99] List of avaiable parameter numbers / Paramter list
Access level: 2
Unit: -
Description: Contains 100 parameter numbers index 200 - 299.
Index: [0] = Parameter 1
[1] = Parameter 2
[2] = Parameter 3
[3] = Parameter 4
[4] = Parameter 5
[5] = Parameter 6
[6] = Parameter 7
[7] = Parameter 8
[8] = Parameter 9
[9] = Parameter 10
Note: The parameter list array has 2 elements to reduce memory consumption. On each access to an element index 0-
99, the individual result is determined dynamically by the 'BeforeAccess' function. The last element contains the
number of the following parameter array, 0 indicates end of list
r0983[0...99] List of avaiable parameter numbers / Paramter list
Access level: 2
Unit: -
Description: Contains 100 parameter numbers index 300 - 399.
[0] = Parameter 1
Index:
[1] = Parameter 2
[2] = Parameter 3
[3] = Parameter 4
[4] = Parameter 5
[5] = Parameter 6
[6] = Parameter 7
[7] = Parameter 8
[8] = Parameter 9
[9] = Parameter 10
The parameter list array has 2 elements to reduce memory consumption. On each access to an element index 0-
Note:
99, the individual result is determined dynamically by the 'BeforeAccess' function. The last element contains the
number of the following parameter array, 0 indicates end of list
r0984[0...99] List of avaiable parameter numbers / Paramter list
Access level: 2
Unit: -
Contains 100 parameter numbers index 400 - 499.
Description:
Index: [0] = Parameter 1
[1] = Parameter 2
[2] = Parameter 3
[3] = Parameter 4
[4] = Parameter 5
[5] = Parameter 6
[6] = Parameter 7
[7] = Parameter 8
[8] = Parameter 9
[9] = Parameter 10
Note: The parameter list array has 2 elements to reduce memory consumption. On each access to an element index 0-
99, the individual result is determined dynamically by the 'BeforeAccess' function. The last element contains the
number of the following parameter array, 0 indicates end of list
1-110
P-Group: Communications
P-Group: Communications
P-Group: Communications
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Unsigned16
Data set: -
Data type: Unsigned16
Data set: -
Data type: Unsigned16
Data set: -