Siemens Sinamics G120 Series Parameter Manual page 266

Parameters
List of Parameters
r2844.0 BO: Q RS-FF 2 / Q RS-FF 2
Access level: 3
Unit: -
Description: Displays output of RS-FlipFlop 2, inputs are defined in P2843[0], P2843[1]
Bit field: Bit Signal name
00 Output of BO
Dependency: P2801[15] is active level for the RS-FlipFlop.
r2845.0 BO: NOT-Q RS-FF 2 / NOT-Q RS-FF 2
Access level: 3
Unit: -
Description: Displays Not-output of RS-FlipFlop 2, inputs are defined in P2843[0], P2843[1]
Bit field: Bit Signal name
00 Output of BO
Dependency: P2801[15] is active level for the RS-FlipFlop.
p2846[0...1] BI: RS-FF 3 / RS-FF 3
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
-
Description: P2846[0], P2846[1] define inputs of RS-FlipFlop 3, outputs are P2847, P2848.
Index: [0] = Binector input: Set
[1] = Binector input: Reset
Dependency: P2801[16] is active level for the RS-FlipFlop.
r2847.0 BO: Q RS-FF 3 / Q RS-FF 3
Access level: 3
Unit: -
Description: Displays output of RS-FlipFlop 3, inputs are defined in P2846[0], P2846[1]
Bit field: Bit Signal name
00 Output of BO
Dependency: P2801[16] is active level for the RS-FlipFlop.
r2848.0 BO: NOT-Q RS-FF 3 / NOT-Q RS-FF 3
Access level: 3
Unit: -
Description: Displays Not-output of RS-FlipFlop 3, inputs are defined in P2846[0], P2846[1]
Bit field: Bit Signal name
00 Output of BO
Dependency: P2801[16] is active level for the RS-FlipFlop.
1-266
P-Group: Technology
1 signal
Yes
P-Group: Technology
1 signal
Yes
P-Group: Technology
Active: NO
Max
-
P-Group: Technology
1 signal
Yes
P-Group: Technology
1 signal
Yes
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Unsigned16
Data set: -
0 signal FP
No -
Data type: Unsigned16
Data set: -
0 signal FP
No -
Data type: Unsigned32
Data set: -
Factory setting
0
Data type: Unsigned16
Data set: -
0 signal FP
No -
Data type: Unsigned16
Data set: -
0 signal FP
No -