Siemens Sinamics G120 Series Parameter Manual page 33

r0191[0...2] Configuration Control Unit / Config CU
Access level: 3
Unit: -
Description: Displays the actual HW-configuration (SZL vector) of the Control Unit.
Index: [0] = SZL Vector CU and PM combined
[1] = SZL Vector CU
[2] = SZL Vector PM
p0199 Equipment system number / Equip. system no.
Access level: 2
Quick comm. NO
Can be changed: U, T
Min
0
Description: Equipment system number.
This parameter has no operation effect (only for factory purposes).
p0201[0...2] Act. power module code number / Act.Pmod. code no
Access level: 3
Quick comm. NO
Can be changed: T
Min
0
Description: Identifies hardware variant.
Index: [0] = Powerstack code
[1] = Functionality version - Last Digit of MLFB
[2] = Last used PS Id
Notice: Parameter P0201 = 0 indicates that no power module has been identified.
r0203 Act. inverter type / Act. inverter type
Access level: 3
Unit: -
Type number of actual inverter identified.
Description:
Values: 0:
1:
2:
3:
4:
5:
6:
7:
110:
111:
114:
115:
125:
130:
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
No PS Data/Module
reserved
reserved
reserved
reserved
reserved
reserved
reserved
SINAMICS G110
SINAMICS IPM25
SINAMICS PM240
SINAMICS PM250
SINAMICS ET200PRO
SINAMICS PM DCP
P-Group: -
P-Group: -
Active: NO
Max
255
P-Group: Converter
Active: YES
Max
65535
P-Group: Converter
Parameters
List of Parameters
Data type: Unsigned32
Data set: -
Data type: Unsigned16
Data set: -
Factory setting
0
Data type: Unsigned16
Data set: -
Factory setting
0
Data type: Unsigned16
Data set: -
1-33