Siemens Sinamics G120 Series Parameter Manual page 274

Parameters
List of Parameters
p2875[0...1] CI: SUB 2 / SUB 2
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
-
Description: Define inputs of Subtracter 2, result is in P2876.
Index: [0] = Connector input 0 (CI 0)
[1] = Connector input 1 (CI 1)
Dependency: P2802[7] is active level for the Subtracter.
r2876 CO: SUB 2 / SUB 2
Access level: 3
Unit: [%]
Description: Result of Subtracter 2.
Dependency: P2802[7] is active level for the Subtracter.
p2877[0...1] CI: MUL 1 / MUL 1
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
-
Description: Define inputs of Multiplier 1, result is in P2878.
p2877
Index0
Index1
Index: [0] = Connector input 0 (CI 0)
[1] = Connector input 1 (CI 1)
Dependency: P2802[8] is active level for the Multiplier.
r2878 CO: MUL 1 / MUL 1
Access level: 3
Unit: [%]
Description: Result of Multiplier 1.
Dependency: P2802[8] is active level for the Multiplier.
1-274
p2800 p2802[8]
200%
x1
Result
x2
-200%
1 x ∗ x 2
100 %
P-Group: Technology
Active: NO
Max
-
P-Group: Technology
P-Group: Technology
Active: NO
Max
-
x1∗
Result =
100%
1 x ∗ x 2
> 200% →
r2878
If:
100 %
∗
1 x x 2
< -200% →
100 %
P-Group: Technology
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Unsigned32
Data set: -
Factory setting
755[0]
Data type: Floating Point
Data set: -
Data type: Unsigned32
Data set: -
Factory setting
755[0]
x2
Result = 200%
Result = -200%
Data type: Floating Point
Data set: -