Siemens Sinamics G120 Series Parameter Manual page 268

Parameters
List of Parameters
p2850 Delay time of timer 1 / Delay time timer 1
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
0.0 [s]
Description: Defines delay time of timer 1.
P2849, P2850, P2851 are the inputs of the timer, outputs are P2852, P2853.
Dependency: P2802[0] is active level for the timer.
p2851 Mode timer 1 / Mode timer 1
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
0
Description: Selects mode of timer 1.
P2849, P2850, P2851 are the inputs of the timer, outputs are P2852, P2853.
Values: 0:
1:
2:
3:
10:
11:
12:
13:
Dependency: P2802[0] is active level for the timer.
r2852.0 BO: Timer 1 / Timer 1
Access level: 3
Unit: -
Description: Displays output of timer 1.
P2849, P2850, P2851 are the inputs of the timer, outputs are P2852, P2853.
Bit field: Bit Signal name
00 Output of BO
Dependency: P2802[0] is active level for the timer.
r2853.0 BO: Nout timer 1 / Nout timer 1
Access level: 3
Unit: -
Description: Displays Not-output of timer 1.
P2849, P2850, P2851 are the inputs of the timer, outputs are P2852, P2853.
Bit field: Bit Signal name
00 Output of BO
Dependency: P2802[0] is active level for the timer.
1-268
ON delay (seconds)
OFF delay (seconds)
ON/OFF delay (seconds)
Pulse generator (seconds)
ON delay (minutes)
OFF delay (minutes)
ON/OFF delay (minutes)
Pulse generator (minutes)
P-Group: Technology
Active: NO
Max
9999.9 [s]
P-Group: Technology
Active: NO
Max
13
P-Group: Technology
1 signal
Yes
P-Group: Technology
1 signal
Yes
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Floating Point
Data set: -
Factory setting
0.0 [s]
Data type: Unsigned16
Data set: -
Factory setting
0
Data type: Unsigned16
Data set: -
0 signal FP
No -
Data type: Unsigned16
Data set: -
0 signal FP
No -