Siemens Sinamics G120 Series Parameter Manual page 124

Parameters
List of Parameters
p1055[0...2] BI: Enable JOG right / Enable JOG ->
CU240E Access level: 3
CU240S
Quick comm. NO
Can be changed: T
Min
-
Description: Defines source of JOG right when P0719 = 0 (Auto selection of command/setpoint source).
Dependency: When Standard Telegram selected (P0700 = 6, P0922 = Standard Telegram), parameter cannot be changed.
p1055[0...2] BI: Enable JOG right / Enable JOG ->
CU240S DP Access level: 3
CU240S DP-F
Quick comm. NO
Can be changed: T
Min
-
Description: Defines source of JOG right when P0719 = 0 (Auto selection of command/setpoint source).
Dependency: When Standard Telegram selected (P0700 = 6, P0922 = Standard Telegram), parameter cannot be changed.
p1055[0...2] BI: Enable JOG right / Enable JOG ->
CU240S PN Access level: 3
Quick comm. NO
Can be changed: T
Min
-
Description: Defines source of JOG right when P0719 = 0 (Auto selection of command/setpoint source).
Dependency: When Standard Telegram selected (P0700 = 6, P0922 = Standard Telegram), parameter cannot be changed.
p1056[0...2] BI: Enable JOG left / Enable JOG <-
CU240E Access level: 3
CU240S
Quick comm. NO
Can be changed: T
Min
-
Description: Defines source of JOG left when P0719 = 0 (Auto selection of command/setpoint source).
Dependency: When Standard Telegram selected (P0700 = 6, P0922 = Standard Telegram), parameter cannot be changed.
p1056[0...2] BI: Enable JOG left / Enable JOG <-
CU240S DP Access level: 3
CU240S DP-F
Quick comm. NO
Can be changed: T
Min
-
Defines source of JOG left when P0719 = 0 (Auto selection of command/setpoint source).
Description:
Dependency: When Standard Telegram selected (P0700 = 6, P0922 = Standard Telegram), parameter cannot be changed.
1-124
P-Group: Commands
Active: NO
Max
-
P-Group: Commands
Active: NO
Max
-
P-Group: Commands
Active: NO
Max
-
P-Group: Commands
Active: NO
Max
-
P-Group: Commands
Active: NO
Max
-
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Unsigned32
Data set: CDS
Factory setting
0
Data type: Unsigned32
Data set: CDS
Factory setting
2090.8
Data type: Unsigned32
Data set: CDS
Factory setting
8890.8
Data type: Unsigned32
Data set: CDS
Factory setting
0
Data type: Unsigned32
Data set: CDS
Factory setting
2090.9