Siemens Sinamics G120 Series Parameter Manual page 206

Parameters
List of Parameters
p2019[0...7] CI: PZD to USS on RS485 (USS) / PZD->COM (USS)
CU240E Access level: 3
CU240S
Quick comm. NO
Can be changed: T
Min
-
Description: Displays process data received via USS on RS485.
STX
LGE
ADR
PKW
PZD
BCC
ZSW
HIW
PZD mapping from parameterp2019
Index: [0] = Transmitted word 0
[1] = Transmitted word 1
[2] = Transmitted word 2
[3] = Transmitted word 3
[4] = Transmitted word 4
[5] = Transmitted word 5
[6] = Transmitted word 6
[7] = Transmitted word 7
Note: See P2016 (PZD to USS on RS232)
r2024[0...1] USS error-free telegrams / USS error-free tel
Access level: 3
Unit: -
Description: Displays number of error-free USS telegrams received.
Index: [0] = USS on RS485
[1] = USS on RS232
r2025[0...1] USS rejected telegrams / USS rejected tel.
Access level: 3
Unit: -
Description: Displays number of USS telegrams rejected.
Index: [0] = USS on RS485
[1] = USS on RS232
1-206
r0052
p2019
r0052
[0]
[1]
r0021
[2]
[3]
r0053
.
r0053
.
.
[7]
Start of text
Length
Address
Parameter ID value
Process data
Block check character
Status word
Main actual value
P-Group: Communications
Active: NO
Max
-
PZD4 PZD3
ZSW2
PZD
BCC
Process data
Parameter
USS telegram
USS on RS485
P-Group: Communications
P-Group: Communications
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Unsigned32
Data set: -
Factory setting
52[0]
PZD2 PZD1
HIW ZSW1
p2012
PKW
ADR LGE STX
Data type: Unsigned16
Data set: -
Data type: Unsigned16
Data set: -