Siemens Sinamics G120 Series Parameter Manual page 272

Parameters
List of Parameters
p2866 Mode timer 4 / Mode timer 4
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
0
Description: Selects mode of timer 4.
P2864, P2865, P2866 are the inputs of the timer, outputs are P2867, P2868.
Values: 0:
1:
2:
3:
10:
11:
12:
13:
Dependency: P2802[3] is active level for the timer.
r2867.0 BO: Timer 4 / Timer 4
Access level: 3
Unit: -
Description: Displays output of timer 4.
P2864, P2865, P2866 are the inputs of the timer, outputs are P2867, P2868.
Bit field: Bit Signal name
00 Output of BO
Dependency: P2802[3] is active level for the timer.
r2868.0 BO: Nout timer 4 / Nout timer 4
Access level: 3
Unit: -
Description: Displays Not-output of timer 4.
P2864, P2865, P2866 are the inputs of the timer, outputs are P2867, P2868.
Bit field: Bit Signal name
00 Output of BO
Dependency: P2802[3] is active level for the timer.
p2869[0...1] CI: ADD 1 / ADD 1
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
-
Description: Define inputs of Adder 1, result is in P2870.
p2869
Index: [0] = Connector input 0 (CI 0)
[1] = Connector input 1 (CI 1)
Dependency: P2802[4] is the active level for the Adder.
1-272
ON delay (seconds)
OFF delay (seconds)
ON/OFF delay (seconds)
Pulse generator (seconds)
ON delay (minutes)
OFF delay (minutes)
ON/OFF delay (minutes)
Pulse generator (minutes)
p2800 p2802[4]
x1
Index0
x2
Index1
x1 + x2
P-Group: Technology
Active: NO
Max
13
P-Group: Technology
1 signal
Yes
P-Group: Technology
1 signal
Yes
P-Group: Technology
Active: NO
Max
-
200%
Result = x1 + x2
Result
r2870
If: x1 + x2 > 200% →
-200%
SINAMICS G120 Control Units CU240S, Edition 05/2007
Data type: Unsigned16
Data set: -
Factory setting
0
Data type: Unsigned16
Data set: -
0 signal
No
Data type: Unsigned16
Data set: -
0 signal
No
Data type: Unsigned32
Data set: -
Factory setting
755[0]
Result = 200%
x1 + x2 < -200% →
Result = -200%
© Siemens AG 2007 All Rights Reserved
FP
-
FP
-