Siemens Sinamics G120 Series Parameter Manual page 275

p2879[0...1] CI: MUL 2 / MUL 2
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
-
Description: Define inputs of Multiplier 2, result is in P2880.
Index: [0] = Connector input 0 (CI 0)
[1] = Connector input 1 (CI 1)
Dependency: P2802[9] is active level for the Multiplier.
r2880 CO: MUL 2 / MUL 2
Access level: 3
Unit: [%]
Description: Result of Multiplier 2.
Dependency: P2802[9] is active level for the Multiplier.
p2881[0...1] CI: DIV 1 / DIV 1
Access level: 3
Quick comm. NO
Can be changed: U, T
Min
-
Description: Define inputs of Divider 1, result is in P2882.
p2881
Index0
Index1
Index: [0] = Connector input 0 (CI 0)
[1] = Connector input 1 (CI 1)
Dependency: P2802[10] is active level for the Divider.
r2882 CO: DIV 1 / DIV 1
Access level: 3
Unit: [%]
Description: Result of Divider 1.
Dependency: P2802[10] is active level for the Divider.
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
p2800 p2802[10]
200%
x1
Result
x2
-200%
1 x ∗
100 %
X 2
P-Group: Technology
Active: NO
Max
-
P-Group: Technology
P-Group: Technology
Active: NO
Max
-
x1∗ 100%
Result =
x2
∗
x1 100%
> 200% →
r2882
If:
x2
x1 ∗ 100%
< -200% →
x2
P-Group: Technology
Parameters
List of Parameters
Data type: Unsigned32
Data set: -
Factory setting
755[0]
Data type: Floating Point
Data set: -
Data type: Unsigned32
Data set: -
Factory setting
755[0]
Result = 200%
Result = -200%
Data type: Floating Point
Data set: -
1-275