Aci-Tipi Statement Is Not Included On Report; No Bp Readings From Ergoline 900 Ergometer; External Device Does Not Move - GE MAC 1600 Operator's Manual

Ecg analysis system
Hide thumbs Also See for MAC 1600:
Table of Contents

Advertisement

Troubleshooting

ACI-TIPI Statement is Not Included on Report

No BP Readings from Ergoline 900 Ergometer

External Device Does Not Move

A-4
If the ACI-TIPI statement does not appear when expected, do the
following:
Verify the ACI-TIPI option is activated.
For information on activating the ACI-TIPI option, refer to
Setup"
on page 9-29.
Verify ACI-TIPI is enabled on the ECG.
For information, refer to
Verify the ACI-TIPI required information was entered.
The ACI-TIPI statement will print only if the patient's gender, date
of birth, and chest pain indication are included in the patient
information.
Verify the patient is 16 or older.
The ACI-TIPI statement will not print for pediatric patients.
Verify the original ECG was acquired in an electrocardiograph with
the ACI-TIPI option.
If you attempt to print an ECG that was imported from an external
device, the MAC 1600 device will not generate an ACI-TIPI
statement; it will print only if the statement was saved as part of the
ECG.
If blood pressure readings were not taken when expected, do the
following:
Verify the device is supported.
For a list of supported devices, refer to
(Stress Option)"
on page 2-10.
Verify the device is connected to the MAC 1600 unit.
External stress devices connect to the MAC 1600 unit via a serial
cable. For more information, refer to
Verify the protocol is set up to take blood pressure.
For more information, refer to
page 9-16.
Verify the device is set up correctly to acquire blood pressure.
Refer to the product documentation that accompanied the device.
If the external device does not move automatically when expected, do the
following:
Verify the correct device is selected in Basic Setup.
For more information, refer to
MAC™ 1600
"Resting ECG Setup"
on page 9-6.
"Connecting External Devices
"Back View"
"Editing Stress Protocols"
"Basic Setup"
on page 9-2.
"Options
on page 2-3.
on
2028451-182B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents