Table of Contents
Advertisement
4.9.3
SD card
SD card
Displayed data
● SD card inserted
● Total free memory space (kB)
Here the free (still available) and the entire memory on the SD card that can be used by
the user are displayed.
If the free space on the SD card is used up, on the page "Operating mode" > "Logging"
you can make the setting as to whether the oldest process data is overwritten by new
data (FIFO principle) or the logging is stopped.
Notifications
● Notifications
Here you specify whether the events that can be configured later cause a message (SMS
message or e-mail) to be sent or not.
● Change immediately to communication mode
If the option is enabled if one of the events configured later occurs, the RTU changes to
communication mode and sends the message.
If the option is disabled, the RTU sends the message only the next time a mobile wireless
connection is established.
● Recipient group
Here, enter the recipient group for message. You configure recipient groups on the WBM
page "Recipient / Groups".
● When when free memory space falls below the limit
Here you specify whether a message is sent when a value falls below a configurable limit
value (next parameter). The check for free memory space only takes place when logging
is enabled and for at least one variable.
● Limit value (KB)
If the value falls below the limit value, the RTU sends a message if the option above was
enabled.
● Subject and text
Here, you enter the text and subject of the message. You configure the texts on the WBM
page "Tags" > "Texts".
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
Configuration (WBM)
4.9 System
91
Advertisement
Table of Contents
