76181 Karlsruhe Deutschland • For a selection of Siemens level measurement manuals, go to: www. siemens.com/processautomation. Select Products & Systems, then under Process Instrumentation, select Level Measurement. Manual archives can be found on the Support page by product family. •...
The communication card is easily installed by removing the blank Dual-band (850/1900 MHz) antenna for US and Canada only expansion port cover of your SITRANS RD500, and plugging the card into the Dual band (900/2100 MHz) for Europe only expansion port. Configuration is simple using RD500.
30 seconds in Crimson INSTALLING A SITRANS RD500 OPTION CARD The first step is to buy a SIM Card from one of the HSPA+ providers and Caution: The expansion and main circuit boards insert it into the SIM Card slot of the option card.
Figure 4 THE OPTION CARD LABEL Place the option card label on your outer plastic cover of the SITRANS RD500. The label displays the FCC ID of the particular modem being used in the card. POWER SUPPLY REQUIREMENTS WARNING - EXPLOSION HAZARD - DO NOT...
SITRANS RD500. Once the (+Process Automation > +Weighing Technology). option card is configured, the SITRANS RD500 should be power cycled for Select the team Technical Support. Click on Next. the configuration changes to take effect. Additional information can be found Click on the appropriate continent, then select the country followed by in your SITRANS RD500 hardware bulletin.