Table of Contents
Advertisement
Approvals
Maximum antenna gain
Users and installers must be provided with antenna installation instructions and transmitter
operating conditions that must be followed to avoid exceeding the permitted RF exposure.
In this respect, note the technical specifications of the antenna, see appendix Antennas and
accessories (Page 282).
RoHS
The RTU meets the requirements of the EC directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581:2012
cULus
Underwriters Laboratories Inc. meets
● Underwriters Laboratories, Inc.: UL 61010-1 (Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use - Part 1: General
Requirements)
● IEC/UL 61010-2-201 (Safety requirements for electrical equipment for measurement,
control and laboratory use. Particular requirements for control equipment)
● Canadian Standards Association: CSA C22.2 No. 61010-1-12 / CSA-IEC 61010-2-201
cULus HAZ.LOC.
Underwriters Laboratories Inc. meets
● ISA 12.12.01 (Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and
Class III, Divisions 1 and 2 Hazardous (Classified) Locations)
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4; Ta = -40 °C...+70 °C
● Cl. 1, Zone 2, GP. IIC T4; Ta = -40 °C...+70 °C
FM
Factory Mutual Research (FM)
Approval standard class number 3600 and 3611
Approved for use in:
● Class I, Division 2, Group A, B, C, D, Temperature Class T4, Ta = 70 °C
● Class I, Zone 2, Group IIC, Temperature Class T4, Ta = 70 °C
270
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
