Table of Contents
Advertisement
Technical data
Technical specifications - RTU3030C
Power supply from the battery
module *
Current consumption
(without connected consumers
with minimum configuration)
Effective power loss
(without connected consumers
with minimum configuration)
Control output (X10)
Control and supply of external
devices
Maximum Power
Control output (X11)
Control and supply of sensors /
switches for digital inputs / out-
puts
Maximum Power
Digital inputs (X20, X21, X22, X23)
Quantity
Type and material
Connection type
Level logical = 1 when:
Level logical = 0 when:
262
Max- tightening torque of the
screw terminals
Battery modules are not supplied with the device. See Accessories, section Battery
module (Page 275).
In "sleep mode"
In "update mode"
In "communication mode"
In "sleep mode"
In "update mode"
In "communication mode"
Regulated, short-circuit proof, can be configured alternatively, for all outputs:
12 VDC
•
24 VDC
•
See below (power)
Regulated, short-circuit proof, can be configured alternatively, for all outputs:
12 VDC
•
24 VDC
•
See below (power)
8
Schmitt trigger input with an internal pull-up resistor. Can be switched via open drain
transistors, relays or switches.
2-wire technology
Contact closed (≤ 0.4 V)
Contact open
0.56 .. 0.79 Nm (5 .. 7 in lbs)
With battery operation (7.2 VDC): 0,28 mA (typ.)
•
With ext. supply (24 VDC): 14 mA (typ.)
•
With battery operation (7.2 VDC): 71 mA (typ.)
•
With ext. supply (24 VDC): 35 mA (typ.)
•
With battery operation (7.2 VDC): 208 mA (typ.)
•
With ext. supply (24 VDC): 83 mA (typ.)
•
With battery operation (7.2 VDC): 2 mW (typ.)
•
With ext. supply (24 VDC): 340 mW (typ.)
•
With battery operation (7.2 VDC): 510 mW (typ.)
•
With ext. supply (24 VDC): 850 mW (typ.)
•
With battery operation (7.2 VDC): 1500 mW
•
(typ.)
With ext. supply (24 VDC): 2000 mW (typ.)
•
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
