Table of Contents
Advertisement
Configuration (WBM)
4.15 Security
● Frames sent
Number of frames that the RTU has sent.
● Frames to be sent lost
Number of frames, which were ready to send on the RTU that could, however, not be
sent.
4.15.2
VPN
For the requirements for using OpenVPN, refer to the following section:
● Scope of delivery, accessories, requirements (Page 33)
● Security functions for communication (Page 28)
For VPN tunnels the following alternatives can be configured:
● SINEMA Remote Connect
SINEMA RC is the recommended Siemens application for OpenVPN tunnels.
● OpenVPN
With this option configure a freely selectable OpenVPN server.
SINEMA Remote Connect
● Active
Select the relevant option from the drop-down list to enable secure communication via
SINEMA Remote Connect.
You will find the address data in the configuration of SINEMA RC.
● SINEMA Remote Connect-Server
IP address or host name of the SINEMA RC Server
● Port number
Port number of the SINEMA RC Server
● Device ID
Device ID that was assigned to the RTU in the SINEMA RC Server configuration.
● Password
Password that was assigned to the RTU in the SINEMA RC Server configuration.
● Fingerprint currently being used
The fingerprint currently being used by the RTU
● Fingerprint
Here enter the fingerprint that was assigned to the RTU in the SINEMA RC Server
configuration.
The RTU supports SHA-1 and SHA-256.
126
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
