Table of Contents
Advertisement
Preface
CAUTION
To prevent injury, read the manual before use.
Validity of this manual
This manual is valid for the following product:
SIMATIC RTU3030C
Article number: 6NH3112-3BA00-0XX0
Hardware product version 1
Firmware version 2.0
The RTU is used to monitor and control outlying stations that are geographically distributed
and not connected to a power supply network. The RTU can store process data and transfer
it via mobile wireless or via the LAN interface and an external router to a master station.
Figure 1
You will find the the article number of the device on the front right of the housing
You will find the hardware product version of the device printed as a placeholder "X" on the
right of the device (for example X 2 3 4). In this case, "X" would be the placeholder for
hardware product version 1.
You will find the the MAC address of the device on the front right of the housing
You will find the IMEI (International Mobile Equipment Identity) on the right had-side of the
housing.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
SIMATIC RTU3030C
3
Advertisement
Table of Contents
