Recipient Groups - Siemens SIMATIC RTU3030C Operating Instructions Manual

Configuration (WBM)
4.16 User / Recipient
To change the access data (user name, password), you need to select the "Change login
data" check box. The input boxes can then be edited.
● Change login data
When this option is enabled, you can change user data.
You will find a description of the rights of the users in the section "Rights of the users".
● User name
Enter the new user name.
● Password
Enter the new password.
● Repeat password
Repeat the new password.
By clicking "Apply" the changed data is saved and needs to be entered at the next login.
Rights of the users
All created users have the same rights to create new users or delete them and to make
settings on all WBM pages.
● All users can change their own data, including access data (user name, password).
● All users can change the user names and passwords of the other users.
● No user can read the password of another user.
This means that every user has administrator rights.
4.16.2

Recipient groups

Recipient groups
Here you specify the recipient groups for messages (SMS messages / e-mails) of the RTU.
When configuring the individual message types, you always specify a recipient group in the
WBM as the recipient of the messages.
With the recipient groups you specify which message types are received by which groups of
users. For example with a group concept. You can specify that certain messages are
received by employees active in operation and other message types by service employees.
Every user can be assigned to any number of the maximum 10 groups.
136
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C